Keto Pro IP54 36W/840 ACO WH

In stock
SKU
4310636
€9,999,999,999.99

Keto Pro is a versatile general luminaire with IP54 protection, designed for use in warehouses, corridors and wet indoor spaces. The luminaire has a steel housing and a low, narrow structure, and it is available with four different outputs, as well as two housing lengths and colour temperatures. The Keto Pro range also includes radar and Dali models. With the protection grid, available as an accessory, the luminaire is suitable for installation in sports halls and facilities.

Steel housing and opal acrylic diffuser (ACO).

White RAL 9016.

Protection class I.

Mounting on a ceiling.

Linkable 5 x 2,5 mm2.

Installation height 2–6 m

Colour temperatures: 3,000 K and 4,000K. CRI > 80 / Ra > 80.

IP54.

Fixed LED: 1210 mm: 18 W / 2600 lm; 25 W / 3800 lm; 36 W / 5400 lm. 1500 mm: 47 W / 6900 lm.

MacAdam 3 SDCM.

On/off, Dali and RA/MS model (25 W / 36 W).

RA/MS- and PIR/MS-models maximum of three slave luminaires.

Ambient temperature range 0 … 25 °C.

Rated lifetime L70 100 000 h (Ta25°C).

Rated lifetime L80 80 000 h (Ta25°C).

RA/MS = radar models with master/slave connection, DA = Dali, PIR/MS = infrared models with master/slave connection.

 

Also available as Casambi and 1–10V models on a project-specific basis. CRI > 90 available by special order. The colour temperature options available are: 2,700 K, 5,700 K and 6,500 K as well as Tunable White. The lengths 630 mm: 20 W / 2500 lm and 34 W / 4200 lm. 1500 mm: 58 W / 8200 lm also available. A protection grid and suspension set available by special order.

More Information
Suitable for wall mounting Yes
Suitable for suspended mounting No
Suitable for ceiling mounting Yes
Suitable for recessed mounting No
Suitable for surface mounting Yes
Suitable for light line configuration No
Fit for workplace acc. EN 12464-1 No
Lamp type LED not exchangeable
With lamp Yes
Suitable for number of lamps 1
Lamp holder Other
Housing material Steel
Housing surface protection Powder coating
Housing colour White
Cover material Plastic, opal
Type of grid Matt
Voltage type AC
Nominal voltage (min) (V) 220
Nominal voltage (max) (V) 240
Nominal current (min) (mA) 1050
Nominal current (max) (mA) 1050
Type of control gear LED operating device current-controlled
Control gear included Yes
Exchangeable control gear Yes
Dimming 0-10 V No
Dimming 1-10 V No
Dimming DALI-2 No
Dimming DALI No
Dimming DMX No
Dimming DSI No
Dimming potentiometer (integrated) No
Dimming LineSwitch No
Dimming manufacturer's proprietary system No
Dimming mains voltage modulation No
Dimming phase cut-off No
Dimming phase cut-on No
Dimming programmable No
Dimming RF No
Dimming Sine Wave Reduction No
Dimming Zigbee No
Dimming with push-button No
No dimming function Yes
Light distributor Diffuser lens/optic/panel
Light sharing Symmetric
Beam angle Extreme wide beam >80°
Colour consistency (McAdam ellipse) SDCM3
Light outlet Direct
Energy efficiency class of light source according to EU regulation 2019/2015 C
Rated life time L70/B50 at 25 °C (h) 100000
Lumen maintenance at median useful life of 35,000 hrs at 25 °C ambient (tq) 90
Lumen maintenance at median useful life of 50,000 hrs at 25 °C ambient (tq) 85
Lumen maintenance at median useful life of 75,000 hrs at 25 °C ambient (tq) 80
Failure rate at median useful life of 35,000 hrs at 25 °C ambient (tq) 5
Failure rate at median useful life of 50,000 hrs at 25 °C ambient (tq) 5
Failure rate at median useful life of 75,000 hrs at 25 °C ambient (tq) 10
Max. number of luminaires per miniature circuit breaker B16 40
Rated ambient temperature acc. IEC62722-2-1 (min) (°C) 0
Rated ambient temperature acc. IEC62722-2-1 (max) (°C) 25
Suitable for emergency lighting No
Emergency power supply integrated No
With movement sensor No
With air slots No
Suitable for lamp power (min) (W) 36
Suitable for lamp power (max) (W) 36
Maximum system power (W) 36
Luminaire efficacy (lm/W) 150
Effective luminous flux (lm) €5,400.00
Colour of light (alphanumeric) White
Colour temperature (min) (K) €4,000.00
Colour temperature (max) (K) €4,000.00
Flickering value Pst LM 1
Power factor 0.9
Stroboscope effect value SVM 0.4
Constant luminous flux control No
Width (mm) €110.00
Height/depth (mm) €62.00
Length (mm) €1,210.00
Type of wiring Suitable for through wiring
Number of poles 5
Conductor cross section (mm²) 2.5
Connection type Screwless terminal
Total harmonic distortion 10
Photobiological safety according to EN 62471 RG0
Colour temperature switchable No
Lumen setting adjustable No
Beam angle adjustable No
Bluetooth operated No
Compatible with Casambi No
Compatible with Apple HomeKit No
Compatible with Google Assistant No
Compatible with Amazon Alexa No
IFTTT support available No
ETIM class EC002892
Dimming Touch and Dim No
With light sensor No
Filament test according to IEC 60695-2-11 650 °C - 30 s
Colour White
Is tailored No
Product family Keto Pro
Write Your Own Review
You're reviewing:Keto Pro IP54 36W/840 ACO WH